479 - Anti-circumvention

Clear float glass (CFG) exported from Thailand

CFG in nominal thicknesses of 3 to 12 millimetres (mm).

The tolerances for each of these thicknesses are set out in the table below.

The goods have the following characteristics:

• transparent, flat, and rectangle or square in shape.

Glass with the following characteristics are not the goods: 

• coated, coloured, tinted or opaque

• absorbent, reflective or non-reflective layer

• wired;

• bent, edge-worked, engraved, drilled, enamelled or otherwise worked

• framed or fitted with other materials;

• toughened (tempered) or laminated;

• acid etched; or

• low iron

The alleged circumvention goods

The goods the subject of the application are CFG in nominal thicknesses of 3 to 12 mm (i.e. the goods currently the subject of the original anti-dumping notice) which has been edge worked along at least one edge of the CFG sheet (“the circumvention goods”).

Further information on whether goods are included or excluded can be found in the initiation ADN 2018/93 (linked below).

Case information
Applicant	CSR Viridian Ltd (CSR)	Tariff Classification		7006.00.00 (statistical code 49)
Investigation Period	1 July 2013 to 31 March 2018	Injury Examination Period		​
Contacts for this investigation	Case Manager: Tel: (03) 8539 2418 Fax: +61 3 8539 2499 E: investigations3@adcommission.gov.au	Mailing address:		The Director - Investigations 3 Anti-Dumping Commission GPO Box 2013 Canberra ACT 2601

Public Record

Anti-Dumping Notices (ADNs)

Key Documents

All Public Record Documents